Need help?Do you have a question about the Megger MIT310A and is the answer not in the manual?
General| Battery Type | 6 x AA batteries |
|---|---|
| Continuity Test Current | 200 mA |
| Voltage Measurement | 0 to 600 V AC/DC |
| Safety Rating | CAT IV 600 V |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20 °C to +60 °C |
| IP Rating | IP54 |
| Test Voltage | 250 V, 500 V, 1000 V |
| Display | LCD |
| Battery Life | 1000 tests |
Essential safety warnings and precautions to be observed before and during instrument use.
Requirement for trained personnel and risk assessment for electrical work.
Steps for battery installation, test lead checks, supply voltage verification, and general safety notes.
Procedure for conducting continuity tests on MIT300, 310, 320, and 330 models.
How to use the continuity buzzer and interpret its indicators.
Safety precautions and notes for performing insulation tests.
Step-by-step guide to performing an insulation test.
Specific notes for insulation testing and managing the test lock feature on the MIT310A.
Details on battery types and the procedure for replacing them.
Information on fuse types and the process for replacing a blown fuse.
Technical details for insulation testing ranges and accuracy.
Specifications for continuity measurement, buzzer, and resistance ranges.
Specifications for voltage measurement and overall accuracy.
Environmental protection, safety standards, power supply, and battery life details.
Guidelines for instrument repair and handling of static sensitive devices.
To Next Page
