Need help?Do you have a question about the Megger MRCT and is the answer not in the manual?
General| Brand | Megger |
|---|---|
| Model | MRCT |
| Category | Test Equipment |
| Language | English |
Important safety warnings and precautions for using the instrument.
Specific warnings about hazardous voltages and safe operating practices.
Explanation of safety symbols used on the instrument.
Describes the STVI touch panel display and control knob.
Defines acronyms, terms, and definitions used in the manual.
Details the Power Over Ethernet (PoE) input for the STVI.
Instructions for unpacking the unit and powering it on.
Details on Ethernet and USB ports for connectivity.
Overview of STVI menu items and navigation.
Configuring and initiating multiple CT tests.
Performing CT tests manually by injecting current.
Procedure for demagnetizing a CT.
Performing a self-diagnostic test on the unit.
Performing the CT saturation test.
Performing the CT ratio test.
Measuring the winding resistance of a CT.
Performing insulation resistance tests on a CT.
Performing a CT burden test.
Generating, viewing, and configuring CT test reports.
Displaying and analyzing CT excitation curve data.
Performing VT ratio and phase tests.
Measuring VT secondary winding resistance.
Managing test files using the file manager.
Recommended maintenance procedures for the unit.
Guidance for servicing and repairing the instrument.
Creating a test plan and performing CT tests.
Performing concurrent and single-tap CT saturation tests.
Performing concurrent and single-tap CT ratio tests.
Performing concurrent and single-tap CT winding resistance tests.
Performing CT insulation resistance tests.
Performing CT burden tests.
Manually performing CT tests.
Procedure for demagnetizing a CT.
Performing VT ratio and phase tests.
Measuring VT secondary winding resistance.
Diagrams and tables for connecting bushing CTs for testing.
To Next Page
