Need help?Do you have a question about the Megger RCDT320 and is the answer not in the manual?
General| Type | RCD Tester |
|---|---|
| Supply Voltage | 230 V |
| Frequency | 50/60 Hz |
| RCD Trip Current | 10mA, 30mA, 100mA, 300mA, 500mA |
| Test Voltage | 250 V, 500 V |
| Display | LCD |
| Continuity Range | 0 - 200Ω |
| Insulation Resistance Range | 0.01MΩ to 200MΩ |
| Trip Time Measurement Range | 0 ms to 300 ms |
| Voltage Measurement Range | 0 V to 300 V |
| Operating Temperature | -10 °C to 50 °C |
| Storage Temperature | -20°C to +60°C |
Instrument must only be used by suitably trained and competent persons.
Covers test inhibit, overheating, fuse blown, and auto power-down features.
Steps to configure the touch voltage inhibit limit.
Details on RCD test types (AC/DC, 1/2I, I, 5I, 0/180) and measurement.
Steps to select RCD type, current range, and test parameters.
Procedures for 1/2I, 1xI, 5xI, and 0°/180° RCD trip time tests.
Procedure for checking RCD trip current using the RampTest function.
Procedure for measuring voltage using the [V] range.
Detailed specifications for RCD tests, voltage, and frequency measurements.
To Next Page
