Feature RCDT310 RCDT320
3 Phase safe ■■
Display backlight ■
Battery status indication ■■
Auto power down ■■
Fuse blown indication ■■
L-N-E polarity indicators ■■
Voltmeter ■■
Frequency measurement ■
Reverse polarity operation (can be disabled) ■■
∆I, I, 5I RCD trip time test ■■
Auto sequence test ■■
Fault voltage display (selectable) ■■
Max touch voltage selectable (25/50 V) ■■
Touch voltage display ■■
RCD trip current test (RAMP ■
0º/180º polarity selection ■■
Selective breakers ■■
INTRODUCTION GENERAL DESCRIPTION
4
Thank you for purchasing the Megger RCD Tester.
For your own safety and to get the maximum benefit from your
instrument, please ensure that you read and understand the following
safety warnings and instructions before attempting to use the
instruments.
This user manual describes the operation and functions of the following
RCDT300 series of RCD testers:
RCDT310
RCDT320
The RCDT300 Series test instruments have
the following features:
RCDT300_UG_en_V01 07/05/2004 12:07 pm Page 4
To Next Page
Loading...
