To Next PageTo Next PageHow to reset the factory setting parameter list on Meiko Dishwasher?
To reset the factory setting parameter list on your Meiko Dishwasher, switch the power supply ON/OFF within 5 seconds to set parameters back to factory settings. Note that Information 123 will disappear.
What to do if the Meiko EcoStar 430 F-MIKE door is not closed?
If the door of your Meiko Dishwasher isn't closed, check connection S1, change the microswitch, check the microswitch adjustment, or replace the defective I/O circuit board.
What to do if I enter an incorrect password on my Meiko EcoStar 430 F-MIKE Dishwasher?
If you get an incorrect password or no authorization message on your Meiko Dishwasher, enter the code once again.
General| Basket size | 500 x 500 mm |
|---|---|
| Programme cycle time | 120 seconds |
| Boiler capacity | 6 liters |
| Boiler heating | 6 kW |
| Dimensions (W x H x D) | 600 x 820 (850) x 600 mm |
| Delay start | No |
| Child lock | No |
| Water consumption | 2.6 l/cycle |
| Number of programs | 3 |
| Weight | 66 kg |
Outlines the operator's responsibilities for safe machine operation and maintenance.
Details fundamental safety precautions to prevent hazards during operation and maintenance.
Guidelines for safe handling, installation, and assembly of the machine.
Procedures and safety measures for putting the machine into initial operation.
Guide for interpreting information displays and troubleshooting common issues.
Essential safety precautions to follow during routine maintenance activities.
