Why does my Meiko EcoStar 430 F say maintenance is required?
Your Meiko Dishwasher indicates that maintenance is required because the set operating hours (P122) or batch number (P123) has been reached. Inform the service department and perform maintenance. After maintenance, reset the maintenance counter (P124).
What to do if my Meiko EcoStar 430 F Dishwasher hood is not closed?
If the hood of your Meiko Dishwasher is not closed, you should check connection S1, check the microswitch adjustment, change the microswitch or replace a defective I/O circuit board.
What to do if my Meiko EcoStar 430 F asks for factory setting parameter list?
To address the 'Factory setting parameter list' message on your Meiko Dishwasher, switch the power supply ON/OFF within 5 minutes and set parameters back to factory settings. This action will be rejected, and parameters will be retained and Information 123 will disappear.
How to resolve the 'Incorrect password / no authorization' error on my Meiko EcoStar 430 F?
To resolve the 'Incorrect password / no authorization' error on your Meiko Dishwasher, enter the code once again.
Why is the emergency program active on my Meiko Dishwasher?
The emergency program on your Meiko Dishwasher may be active, restricting washing, because there is no boiler or tank heating. Check the system to resolve this.
General| Brand | Meiko |
|---|---|
| Model | EcoStar 430 F |
| Category | Dishwasher |
| Language | English |
Details and meanings of safety symbols used throughout the operating instructions.
Operator responsibilities for ensuring safe machine operation and maintenance.
Safety guidelines for electrical work on the machine.
Ensuring proper installation area and compliant electrical connection.
Procedure for switching off the machine in an emergency.
Pre-operational checks and procedures by a service engineer.
Description and function of buttons and displays on the control panel.
Explanation of A0 and Thermolabel control systems for hygiene.
Clearing information displays and identifying fault causes.
Table of information codes, descriptions, and possible causes.
Explanation of error messages displayed by the machine.
Possible causes and solutions for error codes related to temperature and time.
Possible causes and solutions for errors in water level and tank analysis.
Possible causes and solutions for errors related to temperature, hood, and sensors.
Essential safety precautions before and during maintenance work.
To Next Page
