To Next PageTo Next Page
Need help?Do you have a question about the Meiko EcoStar 545 D-M and is the answer not in the manual?
General| Brand | Meiko |
|---|---|
| Model | EcoStar 545 D-M |
| Category | Dishwasher |
| Language | English |
Operator's obligation to ensure safe machine operation by adhering to regulations and proper maintenance.
Essential safety precautions for operating the machine, including qualified personnel, hot water handling, and electrical safety.
Guidelines for qualified electricians on performing repairs and checks on the machine's electrical components.
Safety guidelines for moving, installing, and assembling the machine to prevent damage and injury.
Detailed requirements for safe electrical connection, including voltage, wiring, and protection measures.
Specifications for fresh water connection, including pressure, water quality, and a dirt trap for solenoid valve protection.
Critical safety points and procedures for initial installation setup and commissioning by qualified personnel.
Fundamental principles for loading baskets and operating the machine during the wash and rinse cycles.
Steps for cleaning the appliance after draining, including removing residues, cleaning wash arms, and nozzles.
Details how to set various parameters like rinse agent, detergent, and water hardness using the membrane keypad, including bleeding procedures.
Describes how the machine reports status and potential issues, especially related to the water softener and chemical levels.
Details specific status indicators for the water softener and chemical supply levels.
Lists and explains various error messages indicated by the machine's displays.
Troubleshooting step for when the tank temperature display is dark, indicating potential heating element or sensor issues.
Troubleshooting step for when the boiler temperature display is dark, indicating potential heating element or sensor issues.
Troubleshooting for when both displays are dark, suggesting power or inlet valve issues.
Troubleshooting for when all displays are dark, indicating a power supply issue.
Essential safety precautions to follow before and during maintenance or repair work on the appliance.
A detailed maintenance plan outlining checks and procedures for various machine components and systems.
