The cleaning and disinfection program starts and automatically runs through to the
program end.
During the program sequence, the wash chamber is locked.
After the program ends:
Put on rubber gloves.
Open wash chamber door
Remove rubber gloves.
6.3 To interrupt the program
To interrupt a program:
Press the error acknowledgement button .
The wash-chamber door will remain locked.
Select correct cleaning program corresponding to dirt (see 0 Cleaning program).
Start cleaning program by pushing the corresponding program button.
The cleaning and disinfection program starts and automatically runs through to the pro-
gram end.
During the program sequence, the wash chamber is locked.
To Next Page
Loading...
Need help?
General
