Cleaning program finished.
Display shows temperature in the wash chamber.
Opening the wash chamber door is possible.
To interrupt the pro-
gram
A program which has already started is interrupted.
Wash chamber door remains locked.
Re-start the program.
Wash chamber door will be automatically open or
close.
Pump rim flushing program running
Wash chamber rinsing in operation
6.9 Setting the disinfection parameter A
0
The factory setting for the disinfection parameter for the A
0
value is 60.
To set another A0 value if required:
Inform Meiko Service.
To Next Page
Loading...
Need help?
General
