8.4.2.2 Configuration - Network - Interfaces
Figure 8.15: meinbergOS Web Interface: "Configuration → Network → Interfaces" Tab
The physical and virtual network interfaces and Synchronous Ethernet functionality are configured in this tab
(Fig. 8.15).
Physical Network Interfaces
The available physical network interfaces are listed here and can be selected.
MAC Address: The Media Access Control (MAC) address—the unique identifier for a Network
Interface Controller (NIC). This is used as a physical (OSI Layer 2) network
address.
Link Mode: Transmission parameters that define the link speed and duplex mode; auto-
negotiation enables two linked ports to negotiate the link speed and duplex
mode automatically.
You can select one of seven available modes:
- Autonegotiation (automatic detection) (default)
- 10 Mbit/s Half Duplex (10BaseT)
- 10 Mbit/s Full-Duplex (10BaseT)
- 100 Mbit/s Half Duplex (100BaseT)
- 100 Mbit/s Full Duplex (100BaseT)
- 1 Gbit/s Half Duplex (1000BaseT)
- 1 Gbit/s Full Duplex (1000BaseT)
84 Date: January 19, 2023 microSync
To Next Page
