Meister EF600M - Components; Correct Use; Improper Use of Product

Safety measures must be taken in
order to protect the operator. As a

must be made whilst taking account
of the actual conditions of use. (All
parts of the operating cycle must be
taken into account for this purpose.
This also includes times in which

which it is switched on, but is running
without load.)
3 – Components
 1 Protectivehood
 2 Cuttingdisc
 3 Scaleforparallelcuts
 4 Workbench
 5 Markingformitrecutting
 6 Fixingscrewsformitresetting
 7 Waterreservoir
 8 ON/OFFswitch
 9 Fixingscrewsforparallelstop
10 Parallelstop
11 Anglestop
12 Fixingscrewforprotectivehood
13 Adjustmentkey
14 Plasticcoverhood
4 – Correct use
Cuttingofceramic,stoneware,natural
stoneandthinconcreteslabsuptoa
maximumthicknessof34mm.Usethe
tool,cuttersandaccessoriesforthe
speciedapplicationsonly.Followthe
manufacturer’sinstructions.Allother
applicationsareexpresslyexcluded.
Themachineisintendedonlyforusein
thehousehold.
Thisdeviceisnotdesignedtobeused
bypeople(includingchildren)with
limitedphysical,sensoryormental
capacitiesorthosewithoutexperience
and/orknowledge.Childrenshouldbe
supervisedtoensurethattheydonot
playwiththedevice.
Improper use of the product
Allapplicationscarriedoutwith
thedevicethatarenotlistedinthe
“Correctuse”chapterwillbeconsidered
improperuse.
Usesforwhichthetoolisnotdesigned
maycauserisksandinjury.Donot
useaccessoriesthatarenotintended
specicallyforthiselectricaltool.
Justbecauseyoucanaxanaccessory
toyourelectricaltool,thereisno
guaranteeitissafetouse.
Thepermittedrevolutionsofthetool
insertmustbeatleastashighasthe
highestvaluespeciedontheelectrical
tool.Accessoriesthatturnfasterthanis
permittedmaybreakandyaway.
Theexternaldiameterandthickness
ofthetoolinsertmustmatchthe
dimensionsofyourelectricaltool.
Incorrectlymeasuredtoolinsertscannot
beproperlyprotectedorchecked.
Cuttingdiscsorotheraccessoriesmust
tpreciselyontothesandingspindleof
yourelectricaltool.Toolinsertsthatdo
nottpreciselytothesandingspindle
oftheelectricaltoolwillrotateunevenly,
vibrateveryheavilyandmayleadtoa
lossofcontrol.
Thereisariskofinjury.Theuserof
thedeviceisliableforallpropertyand
personaldamagesoccurringasthe
resultofincorrectuse.
Ifothercomponentsornon-original
componentsareusedwiththemachine,
themanufacturerguaranteeisvoided.
31
MW-5461060-Bedien-2005.indd 31MW-5461060-Bedien-2005.indd 31 13.05.20 11:0213.05.20 11:02