MELICONI Fully 8 RC - User Manual

Fully 8 RC
Keep this booklet for future reference.
Thank you for choosing a Meliconi remote control.
The FULLY 8 RC universal remote control is ideal for replacing up to 8 remote controls of any brand for TV, Digital Terrestrial
(TER), Satellite (SAT) Decoders, DVD players (including Blu Ray), Videotape recorders (VCR), Personal video recorders
(PVR), cable TV (CAB), other audio video equipment (AUX) or decoders for ADSL TV (ADSL). The remote control has a non-
volatile memory, meaning that it does not lose its settings even if there are no batteries in it.
IMPORTANT: the device must not be exposed to excessive heat sources.
USE OF THE BUTTONS AND FUNCTIONS
The functions of the buttons described below are available only if they are also present on the original remote control.
Volume control +/–
TELETEXT buttons
ON/OFF switches the device OFF and
in some cases ON
Numeric keypad
Confi rm selection
MUTE
turns sound OFF and ON
For selecting an external input
source
For selecting the next programme P+
or the previous programme P–
For moving around within the MENU
Fastext functions or for selecting
sub-menus using colours
Buttons for selecting the device to be
controlled.
DVD/PVR RECORD PAUSE STOP PLAY
buttons
DVD and PVR forward/back functions
Specifi c buttons for decoder
Displays the list of programmes
Selects analogue/digital
Selects digital TV and radio

MELICONI Fully 8 RC Specifications

General

Type	Universal Remote Control
Brand	MELICONI
Model	Fully 8 RC
Number of Devices Controlled	8
Pre-programmed	Yes
Power Source	Battery
Operating Range	Up to 10 meters
Compatible Devices	TV, DVD, VCR
Batteries Required	2 x AAA

Summary

Inserting the Batteries

Battery Insertion and Testing

Instructions for inserting 2 new 1.5V alkaline AAA/LR03 batteries and how to check them.

Battery Safety Precautions

Warning against leaving flat batteries inserted to prevent damage from leakage.

Setting Remote Control Codes

Code Setting Overview

Explanation of the need for specific codes for different devices and available methods.

Setting Codes Using the Internet

Guide to finding and setting codes via the www.meliconi.com/guida website.

Setting Codes Using a Cell Phone (SMS)

Instructions for receiving and setting codes via SMS by sending device details.

Manual Code Setting and Display

Setting Codes Using Manual Search

Procedure for finding the correct code when specific codes are not found.

Entering the Code Directly

Method for inputting a known specific code into the remote control.

Displaying the Code in Use

Procedure to find and note the currently set code after manual search.

Troubleshooting and Support

Common Remote Control Problems

Solutions for issues like no response, indicator light behavior, and incorrect commands.

Information and Warranty Details

Contact information for support and terms of the 2-year warranty.