MELICONI Fully 8.1 - User Manual

Fully 8.1
Thank you for choosing a Meliconi remote control.
The Fully 8.1 remote control is designed to command up to 8 different devices of the following types: TV - SAT (satellite
decoder) - TER (digital terrestrial decoder) - DVD (Dvd and Blu Ray) - PVR (Personal Video Recorder and Media Center) -
CAB (cable TV) - ADSL (ADSL decoder) - AUX (other audio video equipments).
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is off or blinks, the inserted batteries are low,
therefore they need replacement.
WARNING:
As the remote control is capable of controlling 8 devices, during setup (and also during normal use), you must select the
operation mode; then define which device you want to control. (TV / SAT / ecc.)
To select the operation mode for the first 4 devices, press for a moment one of the 4 device selection
buttons at the top corresponding to the device you wish to operate (example: TV ).
To operate with the 5 / 6 / 7 / 8 devices, keep the key pressed and then press the relative key.
Before using the remote control, for each device you wish to control, it is essential to set a specific code, it matched.
Identify the specific code and set it into the remote control using one of the following ways:
MANUAL
SEARCH
SMARTPHONE
TABLET - WEB
ACTIVATION OF REMOTE CONTROL
SELECTION OF OPERATING MODE
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, fire
or the like.
The product is not a toy. Keep out of reach of children or domestic animals.
Keep this booklet for future reference

MELICONI Fully 8.1 Specifications

General

Type	Universal Remote Control
Brand	MELICONI
Model	Fully 8.1
Category	Remote Control
Battery Type	AAA
Number of Batteries	2
Color	Black
Device Support	TV, DVD, VCR
Compatibility	Compatible with most brands

Summary

Inserting Batteries

Battery Test Procedure

Instructions on how to test the inserted batteries using the LED indicator and a specific button.

Selecting Operating Mode

Choosing Device Mode

Guides users on selecting the device type (TV, SAT, etc.) to control using dedicated buttons.

Activating Remote Control

Code Setup Methods

Outlines methods for setting device codes, including web/app and manual search options.

Manual Search for Device Codes

Code Search and Verification

Details the process for manually searching for device codes and verifying their functionality.

Direct Code Entry

Entering Known Device Codes

Procedure for inputting a specific, known code to control a device.

Delete Function by Single Button

Removing Button Assignments

Instructions on how to delete a specific function assigned to a single button.

Buttons and Functions

Mapping Original Functions

Explains how to map original remote control functions to the Meliconi remote keypad.

Memo Function

Recording and Recalling Sequences

Guides on recording button sequences and recalling them later for automation.

Display Code in Use

Extracting and Notating Codes

Procedure to extract and record the currently active code for future reference.

Troubleshooting (F.A.Q.)

Common Issues and Solutions

Addresses common problems like non-working remotes, lost functions, and signal issues.

Reset the Remote Control

Factory Reset Procedure

Instructions to completely reset the remote control to its initial factory settings.

Assistance and Warranty

Contacting Support and Warranty Info

Provides contact details for technical assistance and information regarding the product warranty.