4
Thank you for choosing Meliconi.
This simplified universal remote control contains all the main functions of most
TV remote controls. Insert the batteries and program your remote control before using it.
Keep your Instructions Booklet for future reference.
USING THE KEYS AND FUNCTIONS
FITTING THE BATTERIES
GB
SET-UP
Read these instructions carefully before programming your remote control!
To use the remote control with your appliances, you must first program Speedy 110 as described below.
You can also visit our Internet site www.meliconi.com to have access to interactive instructions for easier
and faster remote control programming
•
Batteries must be changed once a year.
•
Change the batteries if the light indicator starts to flash during use. The batteries are low.
•
When removing batteries, insert the new ones within 5 minutes or you may have to
reprogram your remote control.
•
Make a note of the code for your TV on the adhesive label supplied inside the battery
compartment cover. This note will be handy if you have to reprogram your remote
control.
The remote control requires 2 new AAA/LR03 alkaline batteries. Insert the batteries as shown:
ON/OFF to turn OFF your TV and, in
some cases, to turn ON your TV.
Control the volume using
+
.
To select an external terminal.
To select the next programme or to turn
ON your TV.
Mute key.
Press them together to turn ON your
TV on programme 1.
To select the previous programme
or to turn ON your TV.
Control the volume using
-
.
Light indicator.
To Next Page
Need help?
General
