MELICONI Speedy - User Manual

Thank you for choosing Meliconi.
This simplified universal remote control contains all the main
functions of most TV remote controls of the brands listed
on the back.
Keep your Instructions and Code Booklet for future
reference.
USING THE KEYS AND FUNCTIONS
GB
Use
To select the next
programme or to turn
ON your TV.
Mute key.
Control the volume
using
+/-.
ON/OFF to turn OFF
your TV and, in
some cases, to turn
ON your TV.
To select the
previous programme
or to turn ON
your TV.
Press them together to
turn ON your TV on
programme 1.
To select an
external terminal.
FITTING THE BATTERIES
Before programming and using the
remote control, insert batteries.
The remote control requires 2 new
AAA/LR03 alkaline batteries.
Insert the batteries as shown:
• Batteries must be changed once a year.
• Change the batteries if the light indicator starts to flash during use.
The batteries are low.
• When removing batteries, insert the new ones within 5 minutes or
you may have to reprogram your remote control.
• Make a note of the code for your TV on the adhesive label supplied
inside the battery compartment cover. This note will be handy if you
have to reprogram your remote control.

Summary

Using the Keys and Functions

Fitting the Batteries

Set-up and Programming

Brand Search Programming Mode

Step-by-step guide for programming the remote using brand-specific codes.

Programme Selection Without Dedicated Keys

How to select programmes 0-9 if original remote lacks dedicated keys.

Global Search Remote Control Programming

Programme Selection Without Dedicated Keys

How to select programmes 0-9 if original remote lacks dedicated keys.

Programmed Code Noting

Re-Programming by Entering Noted Code

Troubleshooting

Info-Line and Warranty

Overview

1. Function Description
2. Key Functions and Buttons
3. Important Technical Specifications
4. Usage Features
5. Programming the Remote Control
6. Turning ON the TV after Programming
7. Programmed Code Noting
8. Re-programming by Entering Noted Code
9. Troubleshooting
10. Maintenance Features
11. Warranty
12. Info-Line

This document describes the Meliconi Speedy universal remote control, designed to operate most TV brands. It provides instructions for setup, programming, troubleshooting, and maintenance.

Function Description:

The Meliconi Speedy is a simplified universal remote control that consolidates the main functions of most TV remote controls. Its primary purpose is to turn the TV on/off, change channels, adjust volume, and select external terminals. The remote can be programmed using either a brand-specific code search or a global search method. Once programmed, it offers multiple ways to turn on the TV and navigate channels.

Key Functions and Buttons:

• P (Program Up) / P (Program Down): Used to select the next or previous program, or to turn ON the TV. Pressing both simultaneously turns ON the TV on program 1.
• ** (Power ON/OFF):** Turns OFF the TV and, in some cases, turns ON the TV.
• AV (Audio/Video Input): Selects an external terminal.
• + / - (Volume Up / Volume Down): Controls the volume.
• ** (Mute):** Mutes the TV audio.

Important Technical Specifications:

• Batteries: Requires 2 new AAA/LR03 alkaline batteries.
• Battery Life: Batteries should be changed once a year.
• Low Battery Indicator: The light indicator will flash during use when batteries are low.
• Code Storage: The remote stores the programmed code. If batteries are removed for more than 5 minutes, or if they are flat, the remote may need to be reprogrammed.
• Code Noting: An adhesive label is provided inside the battery compartment cover to note down the TV code for easy re-programming.

Usage Features:

Programming the Remote Control:

There are two main programming modes:

1. Brand Search Programming Mode (Method A):

   • Code Identification: Find the 4-sign brand code for your TV in the provided code list (e.g., Thomson - + - +).
   • Initiate Programming: Ensure the TV is ON. Hold down the AV and P keys simultaneously until the light indicator flashes, indicating programming mode.
   • Enter Code: Release the keys and, within 12 seconds, enter the identified 4-sign brand code.
   • Search for OFF Signal: Point the remote at the TV and slowly press and release the P key several times. Stop when the TV turns OFF.
   • Confirm Programming: When the TV is OFF, press the AV and P keys simultaneously. Three flashes indicate successful completion.
   • Programme Selection (if original remote lacks dedicated keys): If your original remote doesn't have program selection keys (e.g., CH+/-, etc.), you can still select programs 0-9. Hold AV and P simultaneously until the light indicator flashes. Release keys and press P 8 times within 12 seconds. Three flashes confirm. Verify program change with P and P keys.

2. Global Search Remote Control Programming (Method B):

   • Initiate Programming: Ensure the TV is ON. Hold down the AV and P keys simultaneously until the light indicator flashes.
   • Search for OFF Signal: Release the keys, point the remote at the TV, and slowly press and release the P key several times. Stop when the TV turns OFF.
   • Confirm Programming: When the TV is OFF, press the AV and P keys simultaneously. Three flashes indicate successful completion.
   • Programme Selection (if original remote lacks dedicated keys): Similar to Method A, if your original remote lacks dedicated program selection keys, follow the same procedure: hold AV and P simultaneously, release, and press P 8 times within 12 seconds.

Turning ON the TV after Programming:

• Press P or P.
• Press P and P simultaneously (sends code for program 1).
• Press ** (Power ON/OFF)**.

Programmed Code Noting:

After programming, it's recommended to note down the TV code.

• Hold AV and P simultaneously until the light indicator flashes.
• Release keys and, within 12 seconds, press P and P simultaneously.
• Release P and P. Observe the 8 flashes of the LEDs: a long flash indicates '+' and a short flash indicates '-'. Note this sequence on the label in the battery compartment.

Re-programming by Entering Noted Code:

If the remote loses its programming (due to prolonged battery absence or flat batteries):

• Hold AV and P simultaneously until the light indicator flashes.
• Release keys and, within 12 seconds, use the P and P keys to enter the eight-sign code previously noted. Three flashes confirm successful saving.

Troubleshooting:

• TV not responding, light indicator not lighting up: Check battery fitting; replace with new 1.5V AAA/LR03 alkaline batteries if necessary.
• TV not responding, light indicator lights up: Check batteries are new, ensure remote is pointed at the appliance without obstacles. Reset code using programming procedure A or B.
• TV not responding, light indicator flashes: Batteries are low; replace them.
• Not all commands working correctly: Incorrect code may have been used. Reset code using programming procedure A or B.
• TV brand code not in list: Use global search programming procedure B.
• P and P keys not selecting programs: Original remote may not have had this function. Set the code by pressing P 8 times as described in paragraphs A or B.

Maintenance Features:

• Battery Replacement: Change batteries once a year or when the light indicator flashes during use.
• Code Backup: Note the TV code on the provided label inside the battery compartment cover to facilitate re-programming.
• Battery Removal: When removing batteries, insert new ones within 5 minutes to avoid losing programming.

Warranty:

The product comes with a 2-year warranty. The warranty is void if the product is tampered with or used incorrectly.

Info-Line:

For queries, refer to the booklet or visit www.meliconi.it.

MELICONI Speedy Specifications