MELICONI Algo 2.1 - User Manual

Algo 2.1
Thank you for choosing a Meliconi remote control.
The Algo 2.1 remote control is designed to command 2 different devices of the following types: TV - SAT (satellite decoder) -
TER (digital terrestrial decoder) - DVD (Dvd and Blu Ray) - PVR (Personal Video Recorder and Media Center) - CAB (cable
TV) - ADSL (ADSL decoder) - AUX (other audio video equipments).
By LEARN function, you can capture and store infrared signals from other remotes and match at will to one or more buttons.
It is also designed to be connected to the PC / TABLET / SMARTPHONE via MELICONI audiocable (NOT included in the
package) in order to download the latest information to its activation.
The remote control has a permanent memory, so it does not lose its settings even if there are no batteries in it.
The remote control requires 2 new 1.5V AAA/LR03 alkaline batteries, not included in the
package. Insert with the correct polarity as shown in figure.
DO NOT use rechargeable batteries.
BATTERIES TEST: Press and hold the 5 button and check that the LED remains on
continuously until the button is released. If the light is off or blinks, the inserted batteries are low,
therefore they need replacement.
WARNING:
As the remote control is capable of controlling 2 devices, during setup (and also during normal use), you must select the
operation mode; then define which device you want to control. (TV / STB)
To select the operation mode, press for a moment one of the (2) device selection buttons at the top
corresponding to the device you wish to operate (example: TV ).
Before using the remote control, for each device you wish to control, it is essential to set a specific code,
it matched. Use the qr-code on the side or connect to the www.cme.it page and follow the instructions.
SAFETY WARNINGS
The remote control and batteries should not be exposed to excessive heat such as sunlight, fire
or the like.
The product is not a toy. Keep out of reach of children or domestic animals.
ACTIVATION OF REMOTE CONTROL
SELECTION OF OPERATING MODE
Do not leave exhausted batteries inserted, as liquid may leak and damage the remote control
INSERTING THE BATTERIES
Keep this booklet for future reference

MELICONI Algo 2.1 Specifications

General

Brand	MELICONI
Model	Algo 2.1
Category	Remote Control
Language	English

Summary

Remote Control Setup and Operation

Safety Warnings

General safety guidelines for the remote control and batteries, including exposure to heat and keeping away from children.

Inserting and Testing Batteries

Instructions for inserting 1.5V AAA/LR03 batteries, advice against rechargeables, and a test procedure.

Selecting Operating Mode

How to select the device mode (e.g., TV, STB) for controlling multiple devices.

Activating the Remote Control

Procedure for setting specific codes for each device to enable remote control functionality.

Advanced Functions

Setting Via Audiocable

Connecting the remote control to a PC/Tablet/Smartphone via an audio cable to activate functions.

Buttons and Functions

How to use specific button combinations to access certain functions or assign new ones.

Display Code in Use

Procedure to retrieve and note the currently used activation code for future reference.

Delete Function by Single Button

Instructions for removing a learned function from a specific button on the remote.

Learning Signals from Other Remotes

Learn Function Overview

Utilizing the Learn technology to acquire and memorize signals from other infrared remote controls.

Positioning Remote Controls Correctly

Guidelines for optimal placement of the Meliconi and original remotes for signal acquisition.

Capturing Signals

Step-by-step process for capturing infrared signals from an original remote control.

Troubleshooting and Assistance

Combined Keypad

Setting up a combined keypad for controlling two devices (TV and DECODER) simultaneously.

Troubleshooting (F.A.Q.)

Common issues like the remote not working, functions missing, and how to check infrared signal emission.

Assistance

Contact information and important details required for obtaining technical assistance.

Warranty and Environmental Information

Warranty

Details regarding the 2-year warranty, its validity, and conditions for voiding it.

Environmental Precautions

Information on proper disposal of the device and batteries according to environmental regulations.