What to do if Mellanox Technologies InfiniScale MIS5022Q-1BRR Switch is not working and unresponsive?
If your Mellanox Technologies Switch is unresponsive, try these steps: First, unplug the switch and wait for five minutes. Then, plug it back in. If it still doesn't turn on, check the power supplies. If the switch does power on, use the management software to find out why it shut down. As a last resort, you can reset the switch.
What to do if the connector LED for the port connector does not come on in Mellanox Technologies Switch?
If the connector LED for the port connector on your Mellanox Technologies Switch doesn't light up, check that both ends of the cable are securely connected and that the locks on the ends are fastened. Ensure that the latest firmware version is installed on both the cards and the switch. If you're using media adapters, make sure all connections are good, tight, and secure.
What to do if any of the LEDs are red after 30 seconds in Mellanox Technologies InfiniScale MIS5022Q-1BRR?
If any of the LEDs on your Mellanox Technologies Switch are red after 30 seconds, unplug the switch and call your Mellanox representative.
Why is the fan LED red on my Mellanox Technologies Switch?
If the fan LED on your Mellanox Technologies Switch is red, make sure that the ambient temperature is within the range specified in the specification section of the appendix.
General| Manufacturer | Mellanox Technologies |
|---|---|
| Model | InfiniScale MIS5022Q-1BRR |
| Category | Switch |
| Switch Type | Infiniband |
| Port Speed | 40 Gbps |
| Switch Fabric | Non-blocking |
| Form Factor | 1U |
| Ports | QSFP |
Explains terms, icons, and lists related documentation.
Key features, serial number, and version information of the switch.
Covers temperature, stacking, electrical hazards, and cable handling.
Guidelines for rack installation, grounding, and electrical code compliance.
Covers cable types, enclosures, workspace, and WEEE directive.
Explains plug-and-play operation and how to update firmware.
Describes the front panel, ports, and status LEDs on the switch.
Covers QSFP ports, power budget, and management/firmware interfaces.
Details the use of the I2C RJ45 interface for firmware updates.
Details available installation kits and the items included in the package.
Step-by-step guide for installing the switch on a flat surface.
Steps for mounting a single switch or side-by-side in a rack.
Instructions for connecting power and initial system startup.
Procedures for grounding the switch and installing/removing cables.
Steps for removing the switch from the rack in different configurations.
Diagnosing issues related to status LEDs, fan LEDs, and power supply.
Steps for diagnosing port connector errors and unresponsive systems.
Detailed physical, power, environmental, and performance data.
Diagrams and pinout details for SFP+ connectors.
Detailed pinout and signal description for QSFP connectors.
Lists ordering numbers for installation kits and various power cords.
Outlines special electrical connection requirements for specific countries.
To Next Page