What to do if Mellanox Technologies MIS5022Q-1BFR is not working and unresponsive?
To resolve a non-responsive Mellanox Technologies Switch, try these steps: 1. Unplug the switch. 2. Wait 5 minutes. 3. Plug the switch back in. 4. Check the power supplies. 5. Use the management software to determine the cause of the shutdown.
How to fix Mellanox Technologies MIS5022Q-1BFR InfiniBand connector LED not turning on?
If the connector LED for your Mellanox Technologies Switch InfiniBand connector doesn't light up, verify that both ends of the cable are securely connected and locked. Also, ensure that you have installed the latest FW version on both the HCA cards and the switch. If you're using media adapters, check that all connections are good, tight, and secure.
Why Mellanox Technologies Switch does not come on?
To resolve a Mellanox Technologies Switch that won't turn on, start by checking the power supply.
What to do if Mellanox Technologies Switch connector LED is flashing orange?
If the connector LED on your Mellanox Technologies Switch is flashing orange, make sure the Subnet Manager has been started. Check that the cable is properly connected and in good condition at both ends. Also, ensure the connections are secure, without cable weight or twists, and inspect the port connectors.
How to fix Mellanox Technologies MIS5022Q-1BFR with red Status LED?
If the Status LED on your Mellanox Technologies Switch is red, remove and reinstall the power cable.
How to troubleshoot Mellanox Technologies MIS5022Q-1BFR Switch with a red Fan LED?
If the Fan LED is red on your Mellanox Technologies Switch, ensure that the ambient temperature is within the range specified in the Specification section of the Appendix.
General| Brand | Mellanox Technologies |
|---|---|
| Model | MIS5022Q-1BFR |
| Category | Switch |
| Language | English |
General instruction to read all installation steps before connecting power.
Safety advice on using sufficient personnel to lift the product safely.
Warning about operating temperature limits and required ventilation clearance.
Precaution against stacking the chassis on other equipment to prevent damage or injury.
Warning to avoid working on equipment during lightning activity.
Safety guidance for handling heavy and inflexible copper InfiniBand cables.
Precautions for ensuring system stability during rack mounting and servicing.
Specifies that installation should only be done by trained and qualified personnel.
Requirement to install equipment in compliance with local and national electrical codes.
Specifies requirements for power supply cords for North American and European connections.
Instructions for connecting protective earth terminal to building installation.
Requirement to install devices according to national electrical codes.
Instructions for properly grounding the switch according to electrical codes.
Guide on connecting power and the initial power-on sequence.
Explains troubleshooting steps related to Status and Fan LEDs.
Steps to check power supply issues and related LED indicators.
Procedure to follow if the switch does not power on.
Steps to diagnose and resolve issues when the switch is unresponsive.
French safety instruction to read all installation instructions before connecting power.
French warning about operating temperature limits and ventilation clearance.
French precaution against stacking chassis to prevent injury or damage.
French warning to avoid using equipment during thunderstorms.
French safety advice for connecting/disconnecting copper InfiniBand cables.
French precautions for stable rack mounting and maintenance.
French statement that installation must be by trained and qualified personnel.
French requirement to install according to local and national electrical codes.
German safety instruction to read all installation instructions before connecting power.
German warning about operating temperature limits and ventilation clearance.
Spanish safety instruction to read all installation instructions before connecting power.
Spanish warning about operating temperature limits and ventilation clearance.
Spanish instructions for connecting the device to the building's protective earth.
To Next Page
