ConnectX-2 Ethernet Card User Manual Rev 1.6
Mellanox Technologies
7
Revision History
This document was printed on 2/15/11.
Table 1 - Revision History Table
Date Rev Comments/Changes
Jan. 2011 1.6 Changed Air flow requirement
Added to the Set up section
Dec. 19th,
2010
1.5 Minor formatting changes
Nov. 22nd,
2010
1.4 Added Generation D card Mini Form Factor
Oct. 28th,
2010
1.3 Added Technical Support and Firmware and Software Updates sections to the Pref-
ace section
Added RoCE
Added ConnectX EN PXE
Added Set up section, This is a sanity check after card installation.
Added KCC statement to Appendix A
Added QSFP to SFP+ QSA adapter
Removed Gen 1 cards
Formatted EMC table
Changed EN 60950-1: 2001 to EN 60950-1: 2006
Changed RDMA over Ethernet
Added RDMA over Ethernet
New template
April 2010 1.2 New power numbers
Feb. 2010 1.1 Added Section on PXE boot
Feb. 2010 1.0 Initial Release