Why is the System Status LED red on my Mellanox Technologies SB7800?
If the System Status LED on your Mellanox Technologies Switch is red, it indicates a critical system fault such as a CPU error, bad firmware, or over temperature. Ensure that the environmental conditions, such as room temperature, are within the recommended operating range.
What to do if the Front PSU Status LED is red on Mellanox Technologies SB7800?
If the Front PSU Status LED on your Mellanox Technologies Switch is red, check and replace the power cable. If the issue persists, replace the PSU.
What to do if the Fan Status LED is red on Mellanox Technologies SB7800 Switch?
If the Fan Status LED is red on your Mellanox Technologies Switch, ensure the fan is fully inserted and that nothing is blocking the airflow. If the problem continues, replace the FAN FRU.
How to fix Mellanox Technologies Switch if the System Status LED is blinking?
If the System Status LED is blinking for more than 5 minutes on your Mellanox Technologies Switch, connect to the system via the console port and check the software status. If the MLNX-OS software did not load properly, you might need to contact an FAE.
General| Brand | Mellanox Technologies |
|---|---|
| Model | SB7800 |
| Category | Switch |
| Language | English |
To Next Page
