System Model 10/25GbE SFP28 Interfaces* 40/50/56/100GbE QSFP28 Interfaces* Max Throughput
SN2740 64
(using QSFP to SFP splitter
cables)
32 6.4Tb/s
SN2410 Total 64, 48SFP+16
(using QSFP to SFP splitter
cables)
8 4Tb/s
SN2100 64
(using QSFP to SFP splitter
cables)
16
(or 32 50GbE interfaces when using
QSFP to 2xQSFP splitter cables)
3.2Tb/s
SN2010 34
(using QSFP to SFP splitter
cables)
4
(or 8 50GbE interfaces when using
QSFP to 2xQSFP splitter cables)
1.7Tb/s
*The system can support different interfaces and speed rates using QSFP+ to SFP+ adapters or hybrid cables. For further information,
see Splitter (Breakout) Cables and Adapters.
2.2 Management Interfaces, PSUs and Fans
The table below lists the various management interfaces, PSUs and fans per system model.
System Model USB MGT Console PSU Fan
SN2700 Rear Rear (2 ports) Rear 2 units 4 units
SN2740 Front Front (1 port) Front 2 units 4 units
SN2410 Rear Rear (2 ports) Rear 2 units 4 units
SN2100 Front (mini USB) Front (1 port) Front 2 units (non-
replaceable)
4 units (non-
replaceable)
SN2010 Front Front (1 port) Front 2 units (non-
replaceable)
4 units (non-
replaceable)
2.3 Features
For a full feature list, please refer to the system’s product brief. Go to http://www.mellanox.com. In the main menu, click on Products
> Ethernet Switch Systems, and select the desired product page.
2.4 Certifications
The list of certifications (such as EMC, Safety and others) per system for different regions of the world is located on the Mellanox
website at http://www.mellanox.com/page/environmental_compliance.
To Next Page
Loading...
Need help?
General
