3 | P a g e
Quality Statement
Important Safety Information
• Please read all instructions carefully before assembling this product.
• Where applicable, and for your safety, assembly by an adult is strongly
recommended.
• Use only vendor-supplied hardware to assemble this item. Using unauthorized
hardware could jeopardize the structural integrity of the item.
• Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
• Remove all parts and hardware from the box. Place all items on a carpeted or
scratch-free work surface, as this will avoid damaging parts during assembly.
• The shipping box can provide an ideal work surface if none is available.
• Use the components and hardware lists below to identify, inventory and separate
each of the hardware and components included.
• To avoid accidentally discarding small components or hardware, do not dispose
of any packaging or contents of the shipping carton until assembly is complete.
• DO NOT USE power tools unless it is explicitly identified in this manual as
required for use during assembly. Power tools can damage the fasteners,
hardware and/or components.
• Do not fully tighten all fasteners / screws until all parts are in place. Failure to
follow these instructions may cause the fasteners / screws to misalign during
assembly.
Care & Use
• Use a soft, clean cloth that will not scratch the surface when cleaning.
• Dust often and use a vacuum cleaner crevice tool to clean between seams.
• Keep furniture at least 60cm/2ft from heat sources to avoid damage.
To Next Page
Loading...
