EasyManua.ls Logo

Memmert SFB500 - User Manual

Memmert SFB500
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Universal ovens
UNB 100 - 500
UFB 400 - 500
Sterilisers
SNB 100 - 400
SFB 400 - 500
Incubators
INB 200 - 500
OPERATING INSTRUCTIONS
Question and Answer IconNeed help?

Do you have a question about the Memmert SFB500 and is the answer not in the manual?

Summary

General Notes and Safety

Installation and Setup

Initial Start-Up Procedure

Guides on supervising the oven during its first start-up and checking the temperature probe.

Oven Loading Recommendations

Advises on considering load properties, avoiding flammable materials, and ensuring proper air circulation.

Technical Specifications

Electrical Equipment and Safety

Covers operating voltage, current rating, protection classes, and connection requirements for electrical safety.

Oven Operation

Setting the Target Temperature

Details the process for setting the desired temperature using the SET key and push/turn control.

Operating Modes

Normal Operation Mode

Describes continuous operation where the oven heats and maintains the set temperature.

Timer Operation Mode

Explains how the oven operates using the timer, maintaining temperature until the set time elapses.

Temperature Monitoring and Protection

Mechanical Temperature Limiter (TB)

Details the mechanical temperature limiter that switches off heating if the set maximum temperature is exceeded.

Electronic Monitor Relay

Explains the electronic monitor relay that switches heating to an emergency mode if the setpoint is exceeded.

Steriliser Specifics

Purpose of Hot Air Sterilisers

Defines the intended purpose of SNB/SFB ovens for sterilising medical materials with dry heat.

Error Codes and Service

Summary

General Notes and Safety

Installation and Setup

Initial Start-Up Procedure

Guides on supervising the oven during its first start-up and checking the temperature probe.

Oven Loading Recommendations

Advises on considering load properties, avoiding flammable materials, and ensuring proper air circulation.

Technical Specifications

Electrical Equipment and Safety

Covers operating voltage, current rating, protection classes, and connection requirements for electrical safety.

Oven Operation

Setting the Target Temperature

Details the process for setting the desired temperature using the SET key and push/turn control.

Operating Modes

Normal Operation Mode

Describes continuous operation where the oven heats and maintains the set temperature.

Timer Operation Mode

Explains how the oven operates using the timer, maintaining temperature until the set time elapses.

Temperature Monitoring and Protection

Mechanical Temperature Limiter (TB)

Details the mechanical temperature limiter that switches off heating if the set maximum temperature is exceeded.

Electronic Monitor Relay

Explains the electronic monitor relay that switches heating to an emergency mode if the setpoint is exceeded.

Steriliser Specifics

Purpose of Hot Air Sterilisers

Defines the intended purpose of SNB/SFB ovens for sterilising medical materials with dry heat.

Error Codes and Service

Memmert SFB500 Specifications

General IconGeneral
BrandMemmert
ModelSFB500
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals