22
Exiting from the mode setting
At the screen,
pressing the MODE button to disable the mode setting.
•
Or, pressing and holding the MODE button for 3 seconds or longer saves the mode setting
and then disables the mode setup function.
•
The mode setup function is automatically disabled 30 seconds after stopping the mode setting.
Assembling / disassembling the clip
•
Assembling : Insert the clip into the connector of the case to assemble until it sounds
“Click!”.
•
Disassembling : Press and hold the snapping part at the inside of the clip hole with the
tool and push the clip to the direction pointed by the arrow to remove.
Connecting the strap
•
Insert the strap into the hole of the mobile phone, and then insert it into the recorder to connect.
Press
<Assembling>
<Disassembling>
Push
Connecting part
Insertion
To Next Page
Loading...
