Memorex MP3225 - Continued on the Next Page

OPERATION (CONTINUED)
11
Press the POWER button 1 to turn the
unit on. Open the CD compartment door
by pressing the OPEN/CLOSE area 2.
Place a CD on the center spindle, with
the printed label side facing up. Close
the CD compartment door.
2
1
1
Press the FUNCTION button
repeatedly to select CD, "--" will blink
in the display for a few seconds, then
the total tracks of the CD will appear
in the display. If there is no disc, "--"
will appear in the display.
2
To start from a specific track, locate
the track using the Tune/Skip/Search
o 1 or n 2 button,then press the
PLAY/PAUSE (¨/p) button 3 to start
to playback the specific track.
3
2
1
3
To play a disc from the beginning, press the
PLAY/PAUSE (
¨/p) button. Press the
PLAY/PAUSE (
¨/p) button again to pause
playback; the Play indicator will blink. Press
the PLAY/PAUSE (
¨/p) button once again to
continue playback; the Play indicator will stop
blinking.
4
Adjust the VOLUME control 1 and
BBS button 2 as desired. Press the
BBS button 2 to the in position to
enhance the bass sound.
2
1
5
To search forward or backward through
the playing track, press and hold the
T
une/Skip
/Search
o 1 or n 2 button, a
chattering noise will be heard. Stop press
-
ing the button to return to normal playback.
2
1
6
TO PLAY A CD
CONTINUED ON THE NEXT PAGE