Memorex MX4114 - Radio Preset Management; Setting Radio Presets

8
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER ON/STANDBY
button to turn the unit on; the
Standby indicator will go out.
1
Press the MEM/CLOCK ADJ
button ❶; “MEMORY” will blink in
the display. Within 6 seconds,
press the REPEAT/MEM-UP
button ❷ until the desired memory
number appears on the display.
2
1
4
Press the TUNING/SKIP/Search
❶ or ❷ button to select a
station.
1
2
3
Press the TUNER Function button
❶ ; “TUNER” appears in the
display.
Press the STOP/BAND (■) button
❷ to select AM or FM.
2
1
2
Press the MEM/CLOCK ADJ
button again to set the station in
the selected memory.
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
In case the main power supply
is interrupted, the memory
presets will be erased.
35
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
12
1
Adjust the PRESET EQ button ❶
and VOLUME buttons ❷ as
desired.
1
2
2
3
Press the REPEAT/MEM-UP
button to select a preset; the
station will automatically be tuned
in.
2
RECALLING RADIO PRESETS (10 EACH BAND)
MX4114.O/M.QXD 2/11/03 8:17 AM Page 8