EN GLISH
EN GLISH
4 EN EN 5
s Do not pull on the cable to remove the plug from the power socket. Make sure the machine is switched off
before you disconnect it from the power supply.
s 7RPLQLPLVHWKHULVNRIDQHOHFWULFVKRFNVWRUHWKHPDFKLQHRQO\LQDGU\HQYLURQPHQW1HYHUOHDYHLWRXW
in rain. Clean it with a damp cloth only.
2.2 SAFETY IN YOUR WORKING ENVIRONMENT
s Ensure that your work area is always well-ventilated and well-lit so as to prevent accidents. In order to
PLQLPLVHGXVWOHYHOVDWWDFKDYDFXXPULQJDQGDFRPSDWLEOHLQGXVWULDOYDFXXPFOHDQHUWRWKHPDFKLQH
s Do not use the machine outdoors.
s 'RQRWXVHWKHPDFKLQHDURXQGĻDPPDEOHRUH[SORVLYHPDWHULDOV
s :KHQWDNLQJWKHPDFKLQHLQWRFRQĺQHGVSDFHVVXFKDVHOHYDWRUVWDNHFDUHWKDWWKHKDQGOHDQGSXVKEDU
are in a vertical position to keep them away from walls and other obstructions.
2.3 OPERATING SAFETY TIPS
s This single-disc sander should only be operated by skilled professionals who have carefully read and
XQGHUVWRRGWKHRSHUDWLQJDQGPDLQWHQDQFHLQVWUXFWLRQVFRQWDLQHGLQWKLVPDQXDOZKRDUHIDPLOLDUZLWK
VXFKPDFKLQHVDQGZKRDUHQRWXQGHUWKHLQĻXHQFHRIDOFRKROGUXJVRUPHGLFDWLRQ
s This machine should be used ONLY for its intended purpose by personnel experienced in using machines
like it.
s Always use work gloves when operating this machine.
s $OZD\VZHDUSURWHFWLYHFORWKLQJZKHQVFUXEELQJSROLVKLQJRUVDQGLQJĻRRUV
s %HH[WUHPHO\FDUHIXOWRNHHSORRVHFORWKLQJKDLUDQGĺQJHUVDZD\IURPWKHPDFKLQHpVPRYLQJSDUWV
s Do not pull on the power cable. Do not allow the machine to roll over the power cable. Do not let the cable
JHWWUDSSHGLQGRRUZD\V.HHSWKHFDEOHDZD\IURPVKDUSHGJHVKHDWDQGRLO
s 'RQRWXVHPDWHULDOVZLWKWKLVPDFKLQHWKDWDUHĻDPPDEOHSRLVRQRXVRUFRUURVLYHRUWKDWSRVHDKHDOWKULVN
s 7RUHGXFHWKHULVNRIĺUHRQO\XVHĻRRUFOHDQLQJDJHQWVDQGĻRRUZD[IURPUHSXWDEOHGHDOHUV
s :KHQXVLQJVROYHQWVDQGRWKHUFOHDQLQJDJHQWVSD\DWWHQWLRQWRWKHPDQXIDFWXUHUpVZDUQLQJV$OZD\VXVH
safety goggles and clothing when recommended to do so.
s :KHQWKHPDFKLQHLVQRWLQXVHVWRUHLWZLWKFDUH,QSDUWLFXODUDYRLGOHDYLQJLWXQDWWHQGHGZKHUHFKLOGUHQ
can reach it.
s :KHQVWRULQJWKHPDFKLQHUHPRYHWKHGULYLQJGLVFRUĻRRUEUXVKLQRUGHUWRSUHYHQWGDPDJHWRWKHDW-
WDFKPHQWĺ[WXUHV
3. OPERATING THE MACHINE
3.1 STARTING OFF
<RXPXVWWDNHWKHIROORZLQJPHDVXUHVEHIRUHRSHUDWLQJWKHPDFKLQHIRUWKHĺUVWWLPHRUDIWHUWKHPDFKLQH
has been transported:
s Carefully unpack the machine. Dispose of unwanted packaging in an environmentally friendly manner.
s Now attach the cover plate to the drive assembly.
s Attach the push rod assembly to the drive assembly using three M8×55 mounting screws and three M8
screw nuts. Ensure that the screws are securely tightened.
s Attach the provided power cable to the drive assembly and the push rod assembly.
s Pull the lever underneath the grip on the right side of the machine toward you in order to unlock it. Pull the
SXVKURGXSXQWLOLWLVYHUWLFDO2QFHWKHSXVKURGKDVORFNHGLQSODFHOHWJRRIWKHOHYHU
1DOK@BHMFSGDR@MCHMFCHRBNQlNNQAQTRG
s Switch the machine off and unplug it from the power source.
s Tip the machine backwards over its wheels until the push rod lies on the ground.
s $WWDFKDGULYLQJGLVFRUĻRRUEUXVKE\VHWWLQJLWDJDLQVWWKHERWWRPRIWKHPDFKLQHDQGWXUQLQJLWFRXQ-
terclockwise.
s 7RUHSODFHDQDWWDFKPHQWGHWDFKLWIURPWKHFRYHUSODWHE\WXUQLQJLWFORFNZLVH7KHQDWWDFKWKHQHZRQH
as described above.
3.2 OPERATING THE MACHINE
3.2.1 Use as a sanding machine
s %HIRUH\RXVWDUWVDQGLQJLWLVLPSRUWDQWWKDW\RXJLYHWKHĻRRUDQLQLWLDOFOHDQWRUHPRYHFRDUVHGLUW
s Attach the machine to a power supply.
s 3XVKWKHSRZHUVDIHW\VZLWFKHVWRZDUGVWKHPLGGOHRIWKHJULSDQGSXOOWKHWZRVWDUWOHYHUVRQHRQHDFK
VLGHRIWKHJULSWRZDUGV\RX7KLVZLOOVWDUWWKHPRWRUDQG\RXPD\EHJLQRSHUDWLQJWKHPDFKLQH
s 3UHVVWKHKDQGOHGRZQZDUGVWLSSLQJWKHPDFKLQHVOLJKWO\
s ,IGXULQJRSHUDWLRQ\RXSXVKWKHKDQGOHGRZQIXUWKHUWKHPDFKLQHZLOOPRYHWRZDUGVWKHOHIW,I\RXUDLVH
WKHKDQGOHDJDLQWKHPDFKLQHZLOOPRYHWRZDUGVWKHULJKW+ROGWKHKDQGOHLQWKHPLGGOHSRVLWLRQWRNHHS
the machine operating in one spot.
Lowering the handle / push rod = MOVEMENT TO THE LEFT
Raising the handle / push rod = MOVEMENT TO THE RIGHT
s :KLOHRSHUDWLQJWKHPDFKLQHUXQWKHSRZHUFDEOHRYHU\RXUVKRXOGHULQRUGHUWRDYRLGDFFLGHQWDOO\UXQ-
ning over it with the machine!
To Next Page
Loading...