Menzer ESM 406 - Troubleshooting

To Next Page

To Previous Page

EN GLISH

8 EN EN 9

5. MAINTENANCE

5.1 CARE AND MAINTENANCE

IMPORTANT: ensure that the plug has been removed from the power socket before servicing the machine!

s Keep the machine clean by regularly wiping it down with a damp cloth.

s Keep the driving discs and brushes in good condition.

s Immediately replace worn or damaged machine parts and always ensure that the power cable is undam-

aged before you switch on the machine.

s Remove the brush and the pad holder after each use. Clean these parts and store them in a dry place.

5.2 TROUBLESHOOTING

/QNAKDL /NRRHAKDB@TRD

The machine does not operate. 1. Check that the plug is plugged into the power

socket.

2. There may be no current running through the

plug. Check the plug fuse and the start/safety

switches for damage.

The disc is skipping. 1. You may have used the brush without using a

moist cleaning agent.

2. Check that the driving disc or brush is in the

correct position. Attach the driving disc or

brush correctly.

The machine makes unusual noises. The screws on the chassis may be loose and need

to be retightened.

ENGLISH