Merax A012C - Remote Control Operation; Operation Modes and Settings

5.3 REMOTE CONTROL
5.4 SETTINGS
5.4.1. Start-up and Shutdown
Press POWER to turn the unit on.
The unit runs in in FAN as default.
Press MODE buon to select the desired operaon mode.
Press POWER again to turn off the power.
5.4.2. Operaon mode
The unit has 4 operaon modes: Cool, fan, dry, sleep.
A. Cooling your room
Select the cool mode to lower the temperature in your room.
Press MODE buon repeatedly unl the LED of COOL operaon lights up.
Press UP/DOWN buon to a
djust the temperature which is displayed on the screen. The
temperature can be set between 16°C and 32°C.
Press SPEED buon repeatedly unl the desired fan speed indicator lights up.
To control the direcon of the air flow horizontally, please press the SWING buon on.
Note: The air condioner stops if the room temperature is lower than selected temperature.

34