Réglage & Entretien
Réglage de la bande de course
La bande de course peut dévier d'un côté pendant le transport, veuillez ajuster la bande de course comme
suit.
1) If the left gap of the running belt is too big,
please keep the treadmill running at the slowest
speed.
Then screw the left adjustment bolt counter-
clockwise and the right adjustment bolt
clockwise in turns until the belt is centered.
2) If the right gap is big, please keep the treadmill
running at the slowest speed.
Then screw the left adjustment bolt clockwise
and the right adjustment bolt counter-clockwise
in turns until the belt is centered.
3) If the belt is too tight, the belt may make noise.
Please screw both adjustment bolts counter-
clockwise in turns. And lube the running belt.
On the contrary, if the belt is too loose, the belt
may slip, please screw both adjustment bolts
clockwise in turns.
To Next Page
Loading...
