Einstellung und Wartung
Einstellung des Laufbandes
Während des Transports kann sich der Laufgurt zu einer Seite durchbiegen. Bitte stellen Sie den Laufgurt
wie folgt ein.
1) If the left gap of the running belt is too big,
please keep the treadmill running at the slowest
speed.
Then screw the left adjustment bolt counter-
clockwise and the right adjustment bolt
clockwise in turns until the belt is centered.
2) If the right gap is big, please keep the treadmill
running at the slowest speed.
Then screw the left adjustment bolt clockwise
and the right adjustment bolt counter-clockwise
in turns until the belt is centered.
3) If the belt is too tight, the belt may make noise.
Please screw both adjustment bolts counter-
clockwise in turns. And lube the running belt.
On the contrary, if the belt is too loose, the belt
may slip, please screw both adjustment bolts
clockwise in turns.
To Next Page
Loading...
