3.7 Vehicle stability
ⓘ You can find information on this topic in the chapter
of the same name in the Body-Equipment-Guideline
for Sprinter Vans.
3.8 Tires
ⓘ You can find information on this topic in the chapter
of the same name in the Body-Equipment-Guideline
for Sprinter Vans.
ⓘ Observe the specifications in chapter 4.2.3
Approved tire sizes (→page32).
3.9 Threaded connections and weld joints
3.9.1 Threaded connections
ⓘ You can find information on this topic in the chapter
of the same name in the Body-Equipment-Guideline
for Sprinter Vans.
ⓘ Observe the other specifications in chap-
ter6.2.1General information on the body-in-white
(→page35).
3.9.2 Weld joints
Welding on vehicles with an electric motor
⑴ NOTE
Cover adjacent parts of the drive system, including
the battery system.
ⓘ Observe the other specifications in chap-
ter6.2.1General information on the body-in-white
(→page35).
3.10 Soundproofing
ⓘ You can find information on this topic in the chapter
of the same name in the Body-Equipment-Guideline
for Sprinter Vans.
3.11 Maintenance and repair
⑴ NOTE
Always observe the regulations on high-voltage work
safety when handling high-voltage vehicles.
ⓘ For other topics specifically concerning high-volt-
age vehicles, refer to the Mercedes-Benz Workshop
Information System (WIS) or reach out via
www.upfitterportal.com
3.11.1 Storing the vehicle
⑴ NOTE
Make sure that the high-voltage battery is not
deep-discharged during lengthy non-operational time.
This can result in damage to the high-voltage battery.
To do this, check the state of charge at regular inter-
vals and recharge the high-voltage battery if neces-
sary via the AC on-board charger.
3.11.2 Maintenance and storage of batteries
Notes on the on-board electrical system
The on-board electrical system supplies the power for
the electric drive and for all electrical consumers and
components in the vehicle.
The power supply in the vehicle is implemented via two
batteries:
• 12 V battery
• High-voltage battery
Mercedes-Benz | Supplemental Guideline for eSprinter – Model Series 907, Edition 2023-8
29
3 Planning of bodies