X
Briefly pull the cruise control lever towards
you ;.
X
Release the accelerator pedal.
Cruise control is activated and resumes the
vehicle's speed to the last speed stored.
i
When you pull the cruise control level
towards you for the first time after starting
the engine, cruise control adopts the cur-
rent speed.
Setting the speed
It may be a moment before the vehicle starts
to accelerate or brake to the set speed. Take
this delay into account when setting the
speed.
X
Briefly push the cruise control lever
upwards : to increase the speed or down-
wards = to reduce the speed.
The last speed stored is increased/
reduced in increments of 1 mph (1 km/h).
Or
X
Press and hold the cruise control lever
up : or down = until the desired speed
has been reached.
X
Release the cruise control lever.
The current speed is stored.
i
Cruise control is not deactivated if you
depress the accelerator pedal. If you accel-
erate briefly to overtake, for example,
cruise control resumes the vehicle’s speed
to the last speed stored after you have fin-
ished overtaking.
Deactivating cruise control
There are various ways to deactivate cruise
control:
X
Briefly press the cruise control lever for-
wards ?.
Or
X
Apply the brakes.
The last speed set remains stored. The last
speed stored is deleted when you switch off
the engine.
Cruise control is deactivated automatically
when:
R
you apply the brakes
R
you apply the parking brake and the c
indicator lamp in the instrument cluster
lights up
R
you are driving slower than 20 mph
(30 km/h)
R
you shift the automatic transmission to
neutral position N while the vehicle is in
motion
R
ESP
®
or ASR intervenes
R
there is a malfunction in the ESP
®
, ASR or
ABS system
Driving systems
163
Driving and parking
Z
To Next Page
Loading...
Need help?
General
