Need help?Do you have a question about the Merck Milli-Q EQ 7008 and is the answer not in the manual?
General| Product Water TOC | < 5 ppb |
|---|---|
| Type of Water Produced | Ultrapure Type 1 water |
| Model | EQ 7008 |
| Brand | Merck |
| Final Water Quality (Resistivity) | 18.2 MΩ·cm @ 25°C |
| Flow Rate | Up to 2 L/min |
| Feed Water Requirements | Pretreated water |
| Display | Touchscreen |
| Connectivity | Ethernet, USB |
| Power Supply | 100-240 V, 50/60 Hz |
| Water Quality Monitoring | Resistivity, TOC |
Details model, catalogue number, and production flow rate of the water system.
Specifies the system's intended applications and limitations for ultrapure water production.
Explains the meaning and status indicated by system LEDs on the Q-POD unit.
Method to deactivate the HMI screensaver by tapping or dispensing.
Instructions for manual and flow-controlled water dispensing using the dispense wheel.
Procedure for dispensing pre-selected volumes of water via the HMI.
How to view and interpret water quality parameters after dispensing.
Information on automatic archiving of dispensing data to the history report.
How to view, understand, and respond to system alerts and alarms.
Guide to navigating the HMI menus, home screen, and main menus.
Overview of available applications and pop-up screen interactions.
Procedure for collecting RO water from the tank's front valve, including cleaning.
How to check the status and replacement needs of installed consumables using color indicators.
Information on identifying consumables using lot and catalog numbers via card reading.
Accessing system details, lab information, and legal notices.
Viewing and exporting daily quality and dispensing event reports.
Graphic representations of system hydraulics and component status.
Accessing diagnostic summaries and technical support information.
Finding contact information for internal and technical support.
Core system operational and configuration parameters.
Settings for the Human Machine Interface display and controls.
Adjusting alarm set points and thresholds for system monitoring.
Network settings for system connection and remote access.
Configuration of system date, time, and user interface language.
Setting and managing system access passwords.
Formatting measurement units for system parameters.
Logging in and managing system administrator access.
Energy saving mode for periods of inactivity.
Precautionary measure to prevent dispensing after continuous delivery.
Setting the inactivity duration before screensaver activation.
Configuration for routine RO cartridge rinsing.
Setting dispense volumes for volumetric dispensing.
Adjusting the display brightness of the HMI.
Enabling or disabling audible alerts from the Q-POD unit.
Optional sensor for detecting water presence and stopping the system.
Foot-operated control for dispensing water.
Kit for pumping water directly to applications like dishwashers.
Cable to trigger external alarms based on system events.
Configuring specific alarm thresholds for various water quality parameters.
Configuring Ethernet and IP settings for system connectivity.
Accessing the HMI remotely via a web browser.
Selecting measurement compensation for resistivity and conductivity.
Guided procedures for installing new consumables.
Step-by-step guide for replacing IPAK Meta and Quanta cartridges.
Guide for replacing the IPAK Gard pretreatment pack.
Procedure for installing application-specific POD-Paks.
Steps for replacing the storage tank vent filter.
Cleaning procedure for the inlet strainer to ensure flow.
Recommended periodic cleaning procedure using Cl2.
Recommended cleaning procedure for pH adjustment.
Calibrating the volumetric dispensing function for accuracy.
Procedures for cleaning the exterior of the equipment.
Information regarding UV lamp replacement and safety.
Procedure to stop production and water processes temporarily.
Procedure to temporarily disable dispensing.
General tips for resolving common system issues.
Instructions for safely powering down the system.
Troubleshooting steps for dispensing inaccuracies.
Recommendations for addressing elevated TOC levels.
Troubleshooting steps for reduced water flow rate.
Steps to check and resolve issues with water tank refilling.
Troubleshooting for unrecognized IPAK cartridges during installation.
Information on how to contact technical support for assistance.
Visual guide to system icons and their corresponding functions.
Detailed specifications for product water quality.
Specifications for water dispensed directly from the tank.
Requirements and specifications for the incoming feed water.
Electrical power and voltage requirements for the system.
Operating conditions for ambient temperature, humidity, and altitude.
Details on HMI, USB, and Ethernet communication capabilities.
Data on system power consumption in various operating modes.
Physical dimensions and weight specifications for system components.
Dimensions for 25 L, 50 L, and 100 L storage tanks.
Catalog numbers for system components and mounting kits.
Catalog numbers for optional accessories like sensors and pedals.
Catalog numbers for replacement consumables and kits.
Information on product warranty and liability limitations.
Copyright notice and usage restrictions for the document.
List of trademarks associated with the product and company.
Essential safety precautions for operating the system.
To Next Page
