Introduction
7
LEDs overview
On the Q-POD
®
unit, 3 ‘check and dispense’ LEDs indicate the dierent states of the system:
1 LEDs on the Q-POD
®
mast 3 Water Quality LED
2 System Power LED 4 System Alarm / Alert LED
LEDs description
LED Meaning
2
The system is powered on.
STEADY: The water quality ts the requirements (water
quality values are below alarm setpoints).
BREATHING: The system is in recirculation mode.
A water quality alarm is raised.
An alert or alarm is raised.
An alarm stop has occurred. A portion or all of the
system has stopped for safety reason.
Note:
- The 3 LEDs light up when powering the system on.
- The 3 LEDs are breathing in case of maintenance (see page 26)
1
2
3
4
To Next Page
Loading...
