Quick start
10
View & manage Alerts and Alarms
Alerts give you advanced warning when maintenance is required and alarms notify you when the
system has encountered a technical issue.
Yellow LED is displayed when an alert is raised.
Red LED is displayed when an alarm is raised.
Press on the alert or the alarm
1
icon
present in the bottom bar to display the alert(s)
or/and alarm(s) which are active.
Note: The notication number indicates how many active alarms are present. When there are no
active alerts or alarms, the relevant icon disappears.
Select a specic alert or alarm to get further
information and to better understand the root
cause. Advice is provided in the information
section to help the user troubleshoot.
If the issue is not resolved and depending upon
the alert and alarm, either select the Contact tab
to nd the technical support hotline number for
further assistance or the Order tab containing
ordering information when applicable.
In order to protect the system and user
applications, alarms of a serious nature will
automatically stop the system from dispensing
water.
Note: These are displayed on the screensaver to
tell the user when the system is not in active use
Alerts provide advanced warning of any
maintenance actions that will be required. Press
Close to cancel the alert for 24 hours. Press Start
on the HMI in order to begin a series of steps
which will clear the alert for a long time.
An Order tab appears when an alert is caused by
a consumable needing replacement soon. The
Order tab contains catalogue numbers of the
consumable(s).
To Next Page
Loading...
