Setting up the instrument
Insert the four supplied batteries into the instrument (AAA).
Insertion of batteries
When?
Before first use or when the LOW BATTERY sign
is shown in the display.
How?
1 . Remove the lid of the battery compartment on the back of the instrument
by pressing carefully in the indicated direction.
2 . Insert the batteries into the compartment, heeding the + and – pole signs.
3 . Close the battery compartment.
Important
When the LOW BATTERY sign first appears, approximately 20
measurements can still be performed. Afterwards the instrument
cannot be switched on.
After screen shutdown, data will be safe for at least two minutes.
To avoid losing stored data, replace batteries immediately.
|
1 0
To Next Page
Loading...
