EasyManuals Logo

MerCruiser Sterndrive 4.3 MPI User Manual

MerCruiser Sterndrive 4.3 MPI
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
Section 3 - On The Water
Page 56 90-864195070 JUNE 2007
Ensure that propeller allows the engine to operate at or near the top of the specified
WOT RPM range (Refer to Specifications and Maintenance) when at full throttle with
a normal boat load.
Operation at 3/4 throttle setting or lower is recommended. Refrain from prolonged
operation at WOT RPM.
Change the engine oil and oil filter. Refer to Maintenance.
Change the transmission oil and filter. Refer to Maintenance (ZF Transmission
models).
1.
End of First Season Checkup
At the end of the first season of operation, contact an authorized Mercury MerCruiser dealer
to discuss and/or perform scheduled maintenance items. If you are in an area where the
product is operated continuously, year‑round, you should contact your dealer at the end of
the first 100 hours of operation or once yearly, whichever occurs first.
1. Require fluid and filter change after the first 25 hours and then every 100 hours.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MerCruiser Sterndrive 4.3 MPI and is the answer not in the manual?

MerCruiser Sterndrive 4.3 MPI Specifications

General IconGeneral
BrandMerCruiser
ModelSterndrive 4.3 MPI
CategoryEngine
LanguageEnglish

Related product manuals