MAINTENANCE
61
6. Remove the cover of the Oberg screen‑style filter and mark the
element so it can be returned to its original orientation with the
correct side up. Clean the element with solvent.
IMPORTANT: The screen‑style filter element must always be returned
to its original orientation (correct side up) to prevent the oil from flowing
through it in the wrong direction.
a - Oberg screen‑style filter
7. Re‑assemble the filter assembly, making sure that the screen is
installed with the up side in the proper orientation.
NOTE: Engine to reservoir oil line lengths affect total oil capacity and will
vary with each installation
To Next Page
Loading...
