MAINTENANCE
82
1. Check for loose, damaged or missing parts, hoses and clamps;
tighten or replace as required.
2. Check plug leads and electrical leads for damage.
3. Remove and inspect the propeller. If nicked, bent or cracked, see
your authorized Mercury Marine dealer.
4. Repair nicks and corrosion damage on the power package's exterior
finish. Use Quicksilver spray paints ‑ see your authorized Mercury
Marine dealer.
Attention Required After Submersion
• Before recovery, contact an authorized Mercury Marine dealer.
• After recovery, immediate service by an authorized Mercury Marine
dealer is required to prevent serious damage to power package.
Maintenance Log
Record all maintenance performed on your outboard here. Be sure to
save all work orders and receipts.
Date Maintenance Performed Engine Hours
To Next Page
Loading...
Need help?
General
