Mercury 100 FourStroke User Manual

FASTENING THE OUTBOARD TO THE TRANSOM
IMPORTANT: The transom mounting surface must be flat within 3.17 mm
(0.125 in.). No step in the transom mounting surface is allowed. The inside
transom mounting bolt washer surface must be flat within 3.17 mm (0.125 in.).
a - Step (not allowed)
b - Gap between transom clamp and boat transom (not allowed)
a
b
51817
OUTBOARD INSTALLATION
114 eng

Mercury 100 FourStroke Specifications

General

Brand	Mercury
Model	100 FourStroke
Category	Outboard Motor
Language	English