FEATURES AND CONTROLS
48
4. Detent tension adjustment screw - This screw can be adjusted
to increase or decrease the effort to move control handle out
of detent positions (cover must be removed). Turning the
screw clockwise will increase tension. Adjust to the desired
tension.
a
b
ob01170
+
-
a - Detent tension
adjustment screw
b - Control handle tension
adjustment screw
5. Start/stop button - Allows the boat operator to start or stop the
engine without using the ignition key.
6. Neutral LED - The neutral LED illuminates when engine is in
neutral gear position. It also flashes when throttle only is
activated.
NOTE: Gear position is determined by sensing the position of the
shift actuator on the engine, not the position of the control handle.
7. Active LED - The active LED illuminates to show the remote
control is active and ready for use.
To Next Page
Loading...
Need help?
General
