FEATURES AND CONTROLS
68
5. Neutral LEDs - The neutral LEDs illuminate when engines are
in neutral gear position. The lights will flash when in throttle
only mode.
NOTE: Gear position is determined by sensing the position of the
shift actuator on the engine, not the position of the control handle.
6. Active LED - The active LED illuminates to show the remote
control is active and ready for use.
7. Sync LED - The "SYNC" LED illuminates when the RPM of the
engines are being synchronized by the DTS system.
a - Neutral LEDS
b - Select button
c - Arrow trackpad
d - Sync LED
e - Throttle only/station
select button
f - Active LED
SYNCHRONIZING ENGINES
The auto synchronizing feature, when engaged, will automatically
adjust all engine speeds to match the speed of the starboard
engine.
To Next Page
Loading...
Need help?
General
