Mercury 2.5 Service Manual

MAINTENANCE
34
ob01223
Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision Lubricants 2-4-C with Teflon or Special Lubricant
101.
• Co-Pilot - Lubricate threads.
ob01224
• Swivel Bracket - Remove four (4) bolts and rear cover and lubricate the inner nylon bushings.
ob01225
• Tilt support pin
ob01059
• Transom clamp screws - Lubricate threads.

Mercury 2.5 Specifications

General

Fuel Induction System	Carburetor
Ignition	CDI
Starting	Manual
Steering	Tiller
Cylinders	1
Recommended Fuel	87 Octane
Shaft Length	15 in (381 mm)
Horsepower	2.5 HP
Gear Shift	Forward, Neutral