To Next PageTo Next Page
Need help?Do you have a question about the Mercury V8 250 and is the answer not in the manual?
General| Engine Type | V8 |
|---|---|
| Horsepower | 250 HP |
| Displacement | 4.6L |
| Fuel Induction System | Electronic Fuel Injection (EFI) |
| Steering | Hydraulic Steering |
| Gear Ratio | 1.75:1 |
| Cylinders | 8 |
| Starting | Electric Start |
| Full Throttle RPM Range | 5200-6000 RPM |
| Alternator Amp | 85 amp |
| Shaft Length | 25 in |
| Weight | 527 lbs |
| Fuel Type | Unleaded 87 octane minimum |
Outlines essential safety practices for working on EFI systems to prevent injury or damage.
Covers essential PCM 112 details, including pinouts for connectors A, B, and C.
Explains PCM operation, fault detection, data fields, and closed-loop control status.
Guides on connecting and using the CDS G3 diagnostic tool for troubleshooting.
Explains how to interpret real-time engine data displayed on the CDS G3 screen.
Lists and explains Mercury universal fault codes (UFC) and their meanings.
Provides procedures for troubleshooting fuel system components like antisiphon valves and fuel pumps.
