EasyManua.ls Logo

Mercury V8 250

Mercury V8 250
302 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EGT_RangeLow
Fault Type: Horn: Guardian: UFC: Transmission to Helm: Freeze Frame Priority:
Nonsticky Caution 100% 572‑25 Yes 2
Explanation
The exhaust gas temperature (EGT) sensor does not appear to be working properly; the PCM received a signal that is below
the valid limit.
Possible Causes
Wiring problem
Defective sensor
Summary of Fault Correction Possibilities
Inspect the wiring.
Check the sensor, replace if required.
ESCLossOfControl
Fault Type:
Horn: Guardian: UFC: Transmission to Helm: Freeze Frame Priority:
Sticky Critical 5% 3032‑6 Yes 4
Explanation
The shift actuator does not appear to be working properly.
Possible Causes
Wiring problem
Worn linkage between shift shaft and shift actuator
Worn gearcase components
Faulty shift actuator
Summary of Fault Correction Possibilities
Correct the wiring problem.
Replace the worn shift linkage components.
Replace the worn gearcase components.
Replace the shift actuator.
ESC_DesiredActualDiff
Fault Type:
Horn: Guardian: UFC: Transmission to Helm: Freeze Frame Priority:
Sticky Critical 5% 3031‑6 Yes 4
Explanation
The shift position reading at the helm ERC does not match the shift actuator position of the engine.
Possible Causes
Wiring problem
Worn linkage between shift shaft and shift actuator
Worn gearcase components
Faulty shift actuator
Summary of Fault Correction Possibilities
Correct the wiring problem.
Replace the worn shift linkage components.
Fault Codes
90-8M0146617 eng JULY 2018 © 2018 Mercury Marine Page 4A-15

Table of Contents

Related product manuals