Mercury 200 Optimax - Page 74

MAINTENANCE
66
6. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti‑Corrosion Grease or 2‑4‑C with Teflon.
26902
Tube Ref No. Description Where Used Part No.
94
Anti-Corrosion
Grease
Propeller shaft
92-802867Q
1
95
2-4-C Marine
Lubricant with Teflon
Propeller shaft 92-802859A1
IMPORTANT: To prevent the propeller hub from corroding and
seizing to the propeller shaft (especially in salt water), always
apply a coat of the recommended lubricant to the entire propeller
shaft at the recommended maintenance intervals and also each
time the propeller is removed.
7. Flo‑Torq I Drive Hub Propellers ‑ Install forward thrust hub,
propeller, continuity washer, rear thrust hub, propeller nut
retainer, and propeller nut onto the shaft.
a
b
c
d
e
f
26908
a - Propeller nut
b - Propeller nut retainer
c - Rear thrust hub
d - Continuity washer
e - Propeller
f - Forward thrust washer