Mercury 200 Optimax - Troubleshooting; Starter Motor Will Not Crank; Engine Will Not Start

MAINTENANCE
73
• Tilt Tube ‑ Lubricate through fitting.
27874
!
WARNING
Incorrect cable lubrication can cause hydraulic lock, leading to
serious injury or death from loss of boat control. Completely
retract the end of the steering cable before applying lubricant.
• Steering Cable ‑ Rotate steering wheel to fully retract the
steering cable end into the outboard tilt tube. Lubricate
through fitting.
a
b
27875
a - Fitting b - Cable end
4. Lubricate the following with Light Weight Oil.
• Steering Link Rod Pivot Points ‑ Lubricate pivot points.
27876