Gear Shifting
DTS PANEL MOUNT REMOTE CONTROL
IMPORTANT: Never shift outboard into gear unless engine speed is at idle. Do
not shift outboard into forward or reverse when the engine is not running.
• The outboard has three gear shift positions to provide operation: Forward
(F), Neutral (N), and Reverse (R).
3427
F
N
R
• When shifting, always stop at neutral position and allow the engine speed
to return to idle.
• Panel mount remote control requires the operator to always press shift
lock while moving the control handle out of the neutral position.
3428
• Advance the control lever to further increase speed.
DTS CONSOLE MOUNT REMOTE CONTROL
IMPORTANT: Never shift the outboard into gear unless the engine speed is at
idle. Do not shift the outboard into forward or reverse when the engine is not
running.
OPERATION
eng 81
To Next Page
Loading...
Need help?
General
