MAINTENANCE
68 eng
EPA Emissions Regulations
All new outboards manufactured by Mercury Marine are certified
to the United States Environmental Protection Agency, as
conforming to the requirements of the regulations for the control
of air pollution from new outboard motors. This certification is
contingent on certain adjustments set to factory standards. For
this reason, the factory procedure for servicing the product must
be strictly followed and, wherever practicable, returned to the
original intent of the design. Maintenance, replacement, or repair
of the emission control devices and systems may be performed
by any marine spark ignition (SI) engine repair establishment or
individual.
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and
engine specifications directly related to emissions, is placed on
the engine at the time of manufacture.
a - Idle speed
b - Engine horsepower
c - Piston displacement
d - Engine power ‑ kilowatts
e - Date of manufacture
f - Family number
g - Regulated emission limit for the engine family
h - Regulated emission limit for the engine family
i - Recommended spark plug and gap
j - Percent of fuel line permeation
SPARK PLUG:
GAP:
EMISSION CONTROL
INFORMATION
THIS ENGINE CONFORMS TO
EMISSION REGULATIONS FOR SPARK IGNITION MARINE ENGINES
CALIFORNIA AND U.S. EPA
REFER TO OWNERS MANUAL FOR REQUIRED MAINTENANCE,
SPECIFICATIONS, AND ADJUSTMENTS
IDLE SPEED (in gear):
FAMILY:
HC+NOx:FEL:
LOW PERM/HIGH PERM:
g/kWh
hp
L
e
d
c
b
a
f
g
h
i
HC+NOx:FEL:
g/kWh
hp
L
CO FEL:
g/kWh
kw
g/kWh
j
43210
To Next Page
Loading...
Need help?
General
